100% Original Dwc Pipe Machine - Single wall corrugated pipe line – Cuishi

plastic single wall corrugated pipe machine 

flexible electrical conduit water tube hose

single wall pvc pp pe plastic corrugated pipe machine

The below are video 1 90mm diameter

1. plastic single wall corrugated pipe machine can produce PP PE PA PVC EAV corrugated pipe which is widely used as wire harness protective pipe for car and machine tool

2. equip with vacuum pump, the machine can produce washing machine pipe, air conditioner pipe, hookah pipe, wash basin drain pipe,medical pipe

3.mold transmission by gear

4. water cooling, wind cooling

Product Paramenters

PE PP PVC Single Wall Corrugated Pipe Production Line

Single wall corrugated pipe has features of high temperature resistance, anti-erosion, anti-abrasion and high strength.

This pipe widely be used in fields of auto wire, electric thread-passing pipes, circuit of machine tool, protective pipes of lamps and lanterns wire, tubes of air conditioner and washing machine.

PE/PP/PVC Single Wall corrugated pipe production line consists of Single Screw Extruder, Mold Blocks, Corrugated Forming Machine, automatic Winder. It can continuously produce different diameter.

Application 

1. Electrical wire conduit pipe

2. Automobile wire harness tube

3. Shisha hookah pipe

4. Washing machine drain hose

5. Air conditioner outlet pipe

6. Medical breathing tube

7. Extension tube

PE PP single wall corrugated pipe production line

SJ50/30 Single screw extruder

single screw extruder.

1. product material: PP PE PA EVA PVC garanule

2. extruder model: SJ45 SJ50 SJ65 SJ75

3. motor power: 11-37kw

4. motor brand: SIEMENS

5. inverter brand: ABB

6. temperature controller brand: OMRON

7. heater material: cast aluminum

8. vacuum loading device: included

9. hopper dryer: include

Item	Description	Unit	SJ50/30
1	Screw diameter	mm	50
2	L: D		30:1
4	Brand motor		Domestic brand
5	Motor speed adjusting mode		Frequency conversion
6	Inverter		Holip /delta /ABB
8	Extrusion output	Kg/h	50-75
9	Material of screw and barrel		38CrMoAlA,Nitrogen treated
10	Nitrogen depth	mm	0.5-0.8
11	Heating power	KW	4 zones, 14kw
12	Cooling power	KW	4 zones, 250w×4
13	Gear box		Hard gear surface, low noise design

4. Die head & forming machine & forming mould

Forming machine 

1. forming type: blowing

2. cooling type: water and wind

3. fan quantity: 4 sets or 6 sets or 8 sets

4.lubricant: oil

5. transmission: gear

6. application: wire harness protective pipe for car or machine tool

Die head
1	Die head material	40Cr
2	Inner structure	Spiral type
3	Melt pressure meter	Equip with a pressure meter to monitor the melt pressure in the die head
Forming machine & forming mould vacuum forming machine 1. forming type: vacuum 2. cooling type: water and wind 3. fan quantity: 4 sets or 6 sets or 8 sets 4. lubricant: oil 5. transmission: gear 6. application: washing machine pipe, wash basin pipe, air conditioner pipe, hookah pipe, medical pipe
1	Material of forming mould	40Cr, nitrogen treated
2	Forming mould	1 set
3	Quantity of mould block	42 pairs
4	Forming machine type	Horizontal type
5	Forming mould moving way	Circle

5. Double disk winder

Item	Description	Unit	SPS63
1	Rolling diameter	mm	400mm
2	Winding speed	/	0.5-12m/min
3	Maximum Winding diameter		2.2m
4	Winding width	/	0.4-0.6m
5	Pipe range	m/min	16-32mm
6	Automatic pipe displacement device	mm	Y132S-4
7	Air pressure		0.3-0.6Mpa
8	Mode of discharging pipes	/	Pneumatic drive