|
Name of Commodity 380V .3P.50HZ |
Quantity |
| PVC WPC FOAM BOARD PRODUCTION LINE From extruder to stacker
1.automatic feeding system 2.SJSZ80/156 conical twin screw extruder 3. T -die mould ( L2450, W1220,T:5-25mm) 4.cooling calibration platform -4 couples calibrators Mould temperature controller 2 sets 5.cooling support 6.eight pairs rubber rollers traction with Trimming and dust collector
|
 |
| 20HP fan cooling chiller Panasonic compressor
|
 |
0.8MPA air compressor  |
 |
| SWP360 crusher |  |
| SMF630 pulvertizer machine with vibrating system |  |
| SHR500/1000 heating/cooling mixer with 75kw inverter control | |
 |
 |
SJSZ-80/156 PVC hard surface foam board line
| No | Name | Type | Quantity | Marks |
| 1.1 | Conical twin screw extruderWith automatic spring feeder | SJSZ-80/156 | 1set | Equipped with automatic spring feeder |
| 1.2 | Electrical control system | 1set | Delta frequency converter, Siemens contactor | |
| 1.3 | Mould | SJM-1350 | 1set | Oil string device at die port, automatic temperature control |
| 1.4 | Vacuum setting die | SDX-1500 | 1set | 4-stage sizing cooling |
| 1.5 | Hauling off | SQY-1400 | 1set | 8 sets, 16 rolls. |
| 1.6 | Cooling bracket | SJTJ-3000 | 1set | |
| 1.7 | Longitudinal cutting device | SQG-1220 | 1set | |
| 1.8 | Transverse cutting machine | SQG-1220 | 1set | |
| 1.9 | Plate unloading device | SJS-1220 | 1set | |
| 1．10 | Hot and cold mixer | SHR500/1000 | 1set | |
| 1.11 | Crusher | SWP-380 | 1set | |
| 1.12 | Grinder | SMP-630 | 1set | |
instruction
| NO | INSTRUCTION | SPECIFICATION |
| 2．1 | RAW MATERIAL | PVC Add auxiliary materials |
| 2．2 | BOARD SIZE | 5-25×1220 |
| 2．3 | Line speed | 0.7-1m/min |
| 2．4 | MAX OUTPUT | 350-500kg/h |
| 2．5 | MACHINE SIZE | 26000×2200×2900 L×W×H |
| 2．6 | WEIGHT | 35t |
| 2．7 | Total installed power | 175kw |
| 2．8 | Actual energy consumption power | 11kw |
| 2．9 | Gas consumption | 0.4m3/min |
| 2．10 | pressure | 0.8mpa |
| 2．11 | Water circulation | 0.4 m3/min |
| 2．12 | VOLTAGE | AC380V±10%50HZ |
| 2．13 | WATER | Industrial water, free of impurities, filtered, water pressure: 0.4MPa, water temperature: 15-25 ℃. |
| 2．14 | work environment | 0-40℃ |
|
3.technological process |
|
Raw material allocation→LOADER MATERIAL → EXTRUDER→T DIE MOULD→CALIBRATION TABLE→COOLING FRAME →8 ROLLERS HAULING OFF→ Longitudinal cutting device→Transverse cutting →transportation→test →package |
Post time: Jul-27-2022